| After-sales Service: | Free Installing and Training, Technical Support |
|---|---|
| Warranty: | One Year Limited Warranty |
| Type: | PVD Vacuum Coating Machine |
| Coating: | Vacuum Coating |
| Substrate: | Steel |
| Certification: | CE, ISO |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier PVD Vacuum Magnetron sputtering Coating System/PVD Vacuum Sputtering Equipment
(Suitable for glass,ceramic,metal,mosaic,crystal ect,but not for plastic)
This kind of machine mainly integrate the technology of MF magnetron sputtering and electric arc ion evaporation, combining the ion source and the pulse bias voltage. It is fully automatic control when coating films.
Applied industry:It is widely used in the watchband, watchcase, jewelry,mobile shell, hardware, tableware, etc. It can coat TiN, TiC, TiCN, TiAlN, CrN, Cu, Au, Al2O3 and other decorative films.It can get fineness and smooth film,good adhesion.
Technical Parameter:
|
Mode Dimension |
JTL-0910 |
JTL-1100 |
JTL-1250 |
|
900*1000mm |
1100*1000mm |
1250*1500mm |
|
|
Coating mode and main confirguration |
Six multi-arc targets + one set of column targets + one set of plane rectangle magnetron sputtering targets |
Eight multi-arc targets + a pair of twin (MF)magnetron sputtering targets |
Twelve multi-arc targets + two sets of plane rectangle magnetron sputtering targets+ a pair of twin (MF)magnetron sputtering targets |
|
Power source |
Electric arc power, DC magnetron power, MF magnetron power, filament power, pulse power, linear ionized source. |
||
|
Process gas control |
Quality flowmeter + electromagnetism ceramic valve |
||
|
Vacuum chamber structure |
Vertical single(side) door, pump system postposition, double water-cooling |
||
|
Vacuum system |
Molecule pump +Roots pump +Mechanical pump(5.0*10-5Pa) Diffusion pump +Roots pump +Mechanical pump(5.0*10-4Pa) |
||
|
Workpiece baking temperature |
Normal temperature to 350 centi-degree PID control, radiation heating. |
||
|
Workpiece motion mode |
Public rotation Frequency control: 0-20 rotation per minute |
||
|
Measure mode |
Number display composite vacuum gauge: from atmosphere to 1.0*10-5Pa |
||
|
Control mode |
Manual/Automatic/PC/PLC + HMI/PC four choice of control mode |
||
|
Remark |
We can design the dimension of the equipment according to customer's special technique requirement. |
||
We can design the dimension of the vacuum chamber according to your requirements. We can also design and configure the vacuum unit and electric controlling system according to your requirement.
This is our machine:
Samples coated by our machine:
HCVAC can help you to enter the PVD coating easily by our vacuum coating machine and full range service. We will provide with most suitable technology according to your requirements.
We will make the special coating solution for each customer; combine the full set production technics to meet your requirements, to ensure high efficiency of production.
Easy to implement
To many people unfamiliar with the process, PVD coating technology seems complicated. However, with the right investments and a good support, it is easier than expected. HCVAC has developed a turnkey coating process that makes a PVD coating centre easy to implement. A complete coating process consists of several steps: stripping (depending on the part's history); pre-treatment; quality control; cleaning & drying; fixturing & visual inspection; PVD coating; quality control & thickness measurement and post-treatment (depending on the application). These steps are all available from one partner: HCVAC Technology, including mature technics and coatings.
More information about our vacuum coating machine,pls do not hesitate to contact:
Contact person:Mandy Liu
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}